The GKTECH S-chassis dual caliper hydraulic e-brake setup is the only COMPLETE kit available anywhere. Literally everything required is included and it’s a range of GKTECH and Wilwood components. If you have an S-chassis and you want your rear brakes to lock up in an instant, this kit is the way to go. Now includes our new CNC machined aluminium handle. Available in silver, black, blue or pink.
We have also added the axle spacer to the kit as the kit spaces the hub out 0.19″ (5mm), this meaning the driveshaft is essentially being stretched that 0.19″ (5mm). However now the difference can be taken up with the axle spacer.
We have different sized options available as it is also a good opportunity to select a different size axle spacer if you were running a different diff/driveshafts combination, or have a fairly low vehicle.
– Nissan 240sx
– Nissan S13 Silvia
– Nissan S14 240SX
– Nissan S15 240SX
– Nissan A31 Cefiro
NOTE: If you are running standard hubs/knuckles the 5mm axle spacer is required
NOTE#2: Will NOT fit European delivered S-chassis’ without the use of JDM or USDM calipers/rotors.
NOTE#3: Designed to be used with standard S-chassis 0.35″ (9mm) rear rotors
NOTE#4: The wilwood calipers have a mounting hole of 3/8inch (9.52mm) and the studs used on our brackets are 0.39″ (10mm) and as such the 2 mounting holes needs to be drilled out on the calipers to 0.39″ (10mm). This is very much a DIY kit and is easy to do.