Gktech roll center correction kit is a cost effective solution to correct rollcenter and bumpsteer due to lowering the car.
The GKTECH roll center correction kit is CNC machined from 7075-T6 aluminum and provides 1.57” (40mm) of roll center correction,1.57” (40mm) of bump steer correction and also re-positions the steering arm to increase steering lock. The roll center correction kit bolts up to the bottom of your standard knuckle and can be removed with no ramifications at all. Circa 60 degrees of lock is achievable without rack spacers once the factory LCA lock stop is removed but if you’re running lots of camber or caster using our offset rack spacers is a good idea to avoid steering bind. By far the cheapest way of getting both roll center correction and lock.
NOTE: These will increase camber as it pushes the bottom of the wheel out 0.98” (25mm) so best to only use with adjustable camber tops.
Please note your current wheel fitment as installing this will push your wheels out the equivalent of a 25mm spacer.